DL-1050 O2/Temperature/Humidity/Dew Point Data Logger module

â–º Multi-platform Remote Access Software

Real-time data from the DL-1000 Data Logger can be accessed from anywhere and at any time using the iAir Utility, the iOS or Android App, or via a regular web browser, as long as they are connected to the same local network as the Data Logger

â–º Supports the MQTT Protocol for IoT Applications

 

â–º Simple and powerful utility

The iAir Utility can be used to configure the modules, monitor real-time data, group DL-1000 modules so that the status of distribution groups can be viewed and managed. The utility also allows the log data to be downloaded and exported to a .CSV file that can then be imported into any industry-standard software or spread sheet for analysis. 

â–º Replaceable Filter Patch (FLT-C001)

The windshield filter of DL-1000 is replaceable and with replaceable patches, which makes it easy for user to replace by themselves. Commercially available sensors are easily affected by dust when used outdoors, which may result in continuous alarm readings and the inability to correctly measure ambient gases. They need to be sent back to the original factory for repair, which increases costs and downtime. ICP DAS’s design allows users to easily replace the filter, reducing maintenance costs and time caused by dust blockage.

• Able to record O2, Temperature, Humidity, and Dew Point Measurements
• Up to 180,000 records with date and time stamps
• Web-based Configuration Interface
• Simple and Powerful Software Utility, iOS APP and Android App Included
• Supports the DCON, Modbus RTU/TCP, and MQTT Protocols
• Includes RS-485/Ethernet/PoE Communication Interfaces
• Relay Output for Audible/Visual Alarm or IAQ Device Control
• Includes redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC input
• IP 43 Protection Approval

DL-1000 series Air Quality Data loggers datasheet

â–º Intelligent Street Lighting in Smart City

DL-1000 series products, with standard industrial communication protocol Modbus RTU/TCP, can integrate with smart city to achieve outdoor air quality monitoring such as O2, CO, CO2, SO2, TVOC, HCHO, and Particle Matter 1/2.5/10. Since these aerosol could accumulate around the sensor and would cause error record after using for a period of time, DL-1000 supports replaceable dust filter patches to easily change the patches inside the filter hood rather than uninstall the device.

 

â–º Outdoor Mobile Air Quality Detection Application

In developed countries, the air quality detection, statistics and evaluation is in urgent need for improvement.  In a vast area, it can only rely on the vehicle  to move to record status of air quality in the area, and to extract the off-line data and send it back. ICP DAS's DL-1000 series can integrate with our 3G/ 4G controllers to transmit data back to the control center wirelessly. 

 

â–º Factory Gas Detection Application

In some factories, H2S is one of the harmful gases. Since the colorless and odorless are two characteristics quite hard to find or feel, sometimes the workers inside the factory get injured inevitably. Joint liability from the injury brings the company massive fines.
DL-1026 H2S detector module can be put on the spot. It is equipped with standard industrial protocols and with high flexibility to integrate information from devices and  transmit it back to the control center. When the concentration of gas is too high, DL-1026 can also send alarm signals to inform relative personnel to evacuate people there.